[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Sync gap setup
Brad,
I seem to remember that around 3 or 4uF is enough for those small oriental motors.
Maybe it was 5 or 6uF. I don't remember the exact figure.
Cheers,
John
-----Original Message-----Phil,Thanks for your reply. The stationary are both on the front side. The motoris the little Oriental brand at 1800 RPM. I don't see a HP rating, but it islisted at 7.5 watts .30 amps. Any suggestion on the proper size cap to usewith John's phase controller?Thanks.--Brad McPeak
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla