Re: [TCML] Fan Shroud Toroid

["Binny" <binny@xxxxxxxxxxxx>]

Just a short note,there is a conductive paint out there .I don't see why one 
couldn't spray it but if I remenber right it is a bit pricy.I think dupont 
makes it.
----- Original Message ----- 
From: "Brian" <ka1bbg@xxxxxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Monday, July 19, 2010 12:55 PM
Subject: Re: [TCML] Fan Shroud Toroid


> Hi, i use a fan shroud and it works fine if you weld the rims 
> together...smooth up the rim after...i just taped mine with black tape so 
> it kept burning thru, but they work fine. brian f.
> ----- Original Message ----- 
> From: <futuret@xxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Monday, July 19, 2010 2:47 PM
> Subject: Re: [TCML] Fan Shroud Toroid
>
>
> > I remember someone used a fan shroud in the past, but I can't
> > remember who it was.  Basically folks have used all sorts of
> > things at one time or another as toploads.  Some of the old
> > fans shrouds didn't even have any paint, they were bare metal.
> >
> > There are some old large heavy industrial fans on a pedestal
> > and have nicely formed shrouds.  These shrouds can be
> > about 40" in diameter or so.  These are often seen in
> > warehouses, post offices, factories, etc.
> >
> > Cheers,
> > John
> > ------------------
> >
> >
> >
> > Hi All,
> >
> > What do you think about a toroid made out of a fan shroud off of one of
> >
> > those swiveling fans that we all pull out in the summer?
> >
> >
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla