Re: [TCML] Detuned or Dentured?

[Miles Mauldin <TeslaMiles@xxxxxxx>]

I'll learn to read my notes some day.....Please disregard the term dentured, I meant detuned.

Best Regards,
Miles

Sent from my iPhone

On Jul 7, 2010, at 9:45 PM, bartb <bartb@xxxxxxxxxxxxxxxx> wrote:

Hi Miles,

What do you mean by the term "denture"?

Regards,
Bart

Miles Mauldin wrote:
I found the post below of interest as I had to recalculate my design due to only having a 20" secondary winding instead of 22". Unfortunately, I already had the primary built along with the topload. Originally I had a computed denture of 4.21% high, but now the best I can compute is in the low 50% range. Is this "detuned"? Or an awful denture that I should consider starting over?

Best Regards,
Miles

Sent from my iPhone

On Jul 7, 2010, at 9:25 AM, Joe Mastroianni <joe@xxxxxxxxxxxxxx> wrote:

Hi Brandon,
For what it's worth, I run my coil in my garage or driveway.  It's only 0.9KW input power, so much less output power, though I don't know exactly how much less or how to measure it.   As long as I don't run it in some sort of awful detuned mode, I have zero interference with household electronics.



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla