Re: [TCML] Detuned or Dentured?

[miles waldron <mileswaldron@xxxxxxxxxxx>]

Hey Bart!

There are two Miles's on the list now. We are both in Atlanta too. I 
have not yet had the pleasure of meeting him.

Miles Waldron (in Atlanta)

On 7/7/2010 9:45 PM, bartb wrote:
> Hi Miles,
>
> What do you mean by the term "denture"?
>
> Regards,
> Bart
>
> Miles Mauldin wrote:
> > I found the post below of interest as I had to recalculate my design
> > due to only having a 20" secondary winding instead of 22".
> > Unfortunately, I already had the primary built along with the topload.
> > Originally I had a computed denture of 4.21% high, but now the best I
> > can compute is in the low 50% range. Is this "detuned"? Or an awful
> > denture that I should consider starting over?
> >
> > Best Regards,
> > Miles
> >
> > Sent from my iPhone
> >
> > On Jul 7, 2010, at 9:25 AM, Joe Mastroianni <joe@xxxxxxxxxxxxxx> wrote:
> >
> > Hi Brandon,
> > For what it's worth, I run my coil in my garage or driveway. It's only
> > 0.9KW input power, so much less output power, though I don't know
> > exactly how much less or how to measure it. As long as I don't run it
> > in some sort of awful detuned mode, I have zero interference with
> > household electronics.
> >
> >
> >
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla