[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Hmmm 1st test not so successful :(



Start with a total combined gap of about 1/8" or 3 mm and go from there.
If you dont have feeler gauges you can use thick paper or thin cardboard.




On Tue, Aug 10, 2010 at 1:15 AM, Julius Crummer <juliustc81@xxxxxxxxx>wrote:

>
>
> Well i plugged in my Tesla Coil and i heard and saw a loud bright spark
> from
> nowhere near the main spark gap....and unpluged it immediately. Good thing
> i
> recorded it. At 1st i thought i blew a cap but turns out my Safety Gap had
> fired. Im guessing the main spark gap(s) are too wide as im using a static
> multi
> gap with copper tubes.
>
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla