Re: [TCML] charging reactors

[DC Cox <resonance@xxxxxxxxxxxx>]

I have off-the-shelf units rated at 1 Hy.  We use them for Marx Generator
capacitor charging (replaces resistors).  A few of these in series and in
oil would
work fine for resonant cap charging supplies.  HV leads on each end.

Contact me off-list.

Dr. Resonance





On Sun, Mar 1, 2009 at 11:56 AM, jimlux <jimlux@xxxxxxxxxxxxx> wrote:

> So, if one needed to build or buy a dozen charging inductors for a resonant
> charged spark gap coil, where would one look..
>
> It's for an application where there's multiple coils being charged from a
> common HV DC bus.
>
> Probably need 5-10 H, and it needs to handle a few hundred mA to amp (e.g.
> 10kW @ 10kV is an amp), and, of course, have a 10-20kV voltage rating.
>
> I'm looking for ideas that are either off-the-shelf or made from off the
> shelf things (e.g. no scrounging a half dozen MOTs and then sawing an air
> gap and rewinding it)
>
> (or, some other clever scheme to charge the primary tanks of multiple
> coils)
>
> Jim
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla