Re: [TCML] charging reactors

[Finn Hammer <f-h@xxxx>]

Jim,

My recent Twin
http://www.palaisdetokyo.com/fo3/low/programme/index.php?page=nav.inc.php&id_eve=2503&session=39

was "choked" by a single reactor, but it was a SS job where the 2 coils 
fired in sync (within 20nS i might add)
But although your cluster of coils are non sync, they might fare 
surprisingly well the same way, just design for a breakrate that is 
[coil breakrate] x [coils].
One de"Q"ing diode per coil.

Cheers, Finn Hammer

jimlux skrev:
> So, if one needed to build or buy a dozen charging inductors for a 
> resonant charged spark gap coil, where would one look..
>
> It's for an application where there's multiple coils being charged 
> from a common HV DC bus.
>
> Probably need 5-10 H, and it needs to handle a few hundred mA to amp 
> (e.g. 10kW @ 10kV is an amp), and, of course, have a 10-20kV voltage 
> rating.
>
> I'm looking for ideas that are either off-the-shelf or made from off 
> the shelf things (e.g. no scrounging a half dozen MOTs and then sawing 
> an air gap and rewinding it)
>
> (or, some other clever scheme to charge the primary tanks of multiple 
> coils)
>
> Jim
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla