[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] 5kv plane gap size

Bart,
Thanks much for a starting range. I have my feeler gauge (50mm) in hand and
will document the resulting discharge voltage @ 800ft.
Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of bartb
Sent: Friday, April 10, 2009 5:50 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] 5kv plane gap size

Hi Jim,

I'm not sure how elevation will vary this value, but breakdown should be 
right at 50mils (pretty narrow). But depending on the surface of the 
dowels, elevation, pressure, etc.. the gap setting may need to be 
slightly larger a few mils to achieve a 5kv breakdown.

Bart

Jim Mora wrote:
> Hi List,
>
> Does anyone know the DC gap breakdown size for 5KV via large, flat dowels
at
> ~800ft-1000ft elevation is? Most of what I find on the Inet are for higher
> voltages.
>
> I may have to trigger this, but; I am trying to keep it simple.
>
> Thanks much,
> Jim Mora
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
>   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla