RE: [TCML] Varnishing Secondary

["Nick de Smith" <tesla@xxxxxxxxxxx>]

AC-43 seems to be only available in 5ltr cans in the UK (expensive, and the
wholesaler has an MOQ that makes it even more costly) - does anyone know
where I can get 1ltr qty at a reasonable price in the UK?

What does it cost in the USA?

Cheers

Nick



> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx 
> [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of DC Cox
> Sent: 09 April 2009 01:31
> To: Tesla Coil Mailing List
> Subject: Re: [TCML] Varnishing Secondary
> 
> 
> I use 2 prior to winding.  Especially heavy coats on inside.
> 
> Then, 5 thin coats after winding.  Sand very lightly between 
> first 4 coats with 1000 grit to remove bubbles, wipe down 
> with an alcohol soaked tack rag (no lint), and then do not 
> sand the last coat.  I use Dolph's AC-43 --- made especially 
> for this purpose.
> 
> Dr. Resonance
> 
> 
> 
> 
> On Wed, Apr 8, 2009 at 2:59 PM, Matthew Stevens
> <truesoutherngeek@xxxxxxxxx>wrote:
> 
> > I was wondering how many coats of varnish would be 
> advisable for the 
> > outside of the secondary coil? I put two coats on mine, but 
> have read 
> > conflicting things about how many is best. Does anyone have any 
> > opinions?
> >
> > Thanks,
> > Matthew
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxxxxxx http://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla