Re: [TCML] Varnishing Secondary

[johnbrooks@xxxxxxxxxxx]

The gallon of Dolphs I got from DC,did quite well on my large secondary
16" by 80" wound w/17g magnet wire,fiberglass secondary.
The gallon covered it about twice,,,no slippage,
Joe in Texas 

On Wed, 08 Apr 2009 17:30 -0700, "DC Cox" <resonance@xxxxxxxxxxxx>
wrote:
> I use 2 prior to winding.  Especially heavy coats on inside.
> 
> Then, 5 thin coats after winding.  Sand very lightly between first 4
> coats
> with 1000 grit to remove bubbles, wipe down with an alcohol soaked tack
> rag
> (no lint), and then do not sand the
> last coat.  I use Dolph's AC-43 --- made especially for this purpose.
> 
> Dr. Resonance
> 
> 
> 
> 
> On Wed, Apr 8, 2009 at 2:59 PM, Matthew Stevens
> <truesoutherngeek@xxxxxxxxx>wrote:
> 
> > I was wondering how many coats of varnish would be advisable for the
> > outside
> > of the secondary coil? I put two coats on mine, but have read conflicting
> > things about how many is best. Does anyone have any opinions?
> >
> > Thanks,
> > Matthew
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
-- 
  
  johnbrooks@xxxxxxxxxxx

-- 
http://www.fastmail.fm - One of many happy users:
  http://www.fastmail.fm/docs/quotes.html

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla