Re: [TCML] OBIT Questions

[jhowson4@xxxxxxxxxxx]

Haha another Jay. H.  Awsome. But now I have to type my whole name.  =)

I have tried to peel off the thin metal case before but with no success.  Just a big tar mess. I have 2 dead ones that have been sitting on the table for a while so maybe I will start trying non-destructivly unpot those.
What type a solvent would be good for dissolving tar?
Thanks,
Jay Howson  =)

-------------- Original message -------------- 
From: Jay Haddock <jhaddock@xxxxxxxxxxxx> 

> jhowson4@xxxxxxxxxxx wrote: 
> > Hey Kevin 
> > " If you "cook" one and remove the core 
> > from the tar and run it in oil, it will run a long time." 
> > could you describe your method for getting these things out o the tar. I 
> tried once and i ended up destroying a good transformer. 
> > thanks 
> > Jay. H 
> > 
> 
> The last one I did, I froze and took a hammer to it. That worked quite 
> well, didn't get every last bit out of the nooks and crannies, but some 
> solvent would clean it up easily. 
> 
> Jay Haddock (yes, another Jay H.) 
> 
> _______________________________________________ 
> Tesla mailing list 
> Tesla@xxxxxxxxxxxxxx 
> http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla