Re: [TCML] JAVATC - questions

["DC Cox" <resonance@xxxxxxxxxxxx>]

Thanks for the data.

DC

On Sun, Mar 23, 2008 at 8:17 PM, bartb <bartb@xxxxxxxxxxxxxxxx> wrote:

> Hi DC,
>
> I've already got the inputs for you. Everything is in centimeters in
> this case, so be sure to either convert to inches or set the units to cm.
>
> Note; Thomas has a cylindrical topload with radius's top and bottom. The
> top load objects are such to represent that particular geometrical
> cylinder (which may seem odd to those not using Javatc). Also, these
> values are not tuned but simply inputs that represent the coil as is.
> You should find k at 0.083. His top terminal C is effectively about
> 8.8pF. I think if he had a toroid say 6cm x 30cm, he would gain maybe
> 1/2 to 3/4 of a turn on the primary.
>
> Take care,
> Bart
>
> J A V A T C version 11.6 - CONSOLIDATED OUTPUT
> Sunday, March 23, 2008 8:09:17 PM
>
> Units = Centimeters
> Ambient Temp = 68°F
>
> ----------------------------------------------------
> Surrounding Inputs:
> ----------------------------------------------------
> 200 = Ground Plane Radius
> 200 = Wall Radius
> 200 = Ceiling Height
>
> ----------------------------------------------------
> Secondary Coil Inputs:
> ----------------------------------------------------
> Current Profile = G.PROFILE_LOADED
> 3.5 = Radius 1
> 3.5 = Radius 2
> 20 = Height 1
> 52 = Height 2
> 480 = Turns
> 23 = Wire Awg
>
> ----------------------------------------------------
> Primary Coil Inputs:
> ----------------------------------------------------
> 9.45 = Radius 1
> 28.2 = Radius 2
> 19 = Height 1
> 19 = Height 2
> 8.5 = Turns
> 0.8 = Wire Diameter
> 0.01 = Primary Cap (uF)
> 76 = Total Lead Length
> 0.5 = Lead Diameter
>
> ----------------------------------------------------
> Top Load Inputs:
> ----------------------------------------------------
> Toroid #1: minor=3, major=13, height=55, topload
> Toroid #2: minor=3, major=13, height=71, topload
> Disc #1: inside=0, outside=8, height=55, topload
> Disc #2: inside=0, outside=8, height=71, topload
> Cylinder #1: diam=13, bottom_h=55, top_h=71, topload
>
> ----------------------------------------------------------------------
>
> DC Cox wrote:
> > Dennis:
> >
> > Fire me your tel number offlist and I will call you and walk you thru
> the
> > program.  It is truly a work of art and is very accurate for almost all
> > designs.  I strongly urge all beginning coil builders to use it prior to
> > laying out their hard earned funds building a coil that may not work
> > properly on initial fire-up.  Bart has done a great service to the
> entire
> > Tesla coil community with his hard work on this program.
> >
> > Dr. Resonance
> >
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla