RE: [TCML] Connecting the primary

["Jim Mora" <wavetuner@xxxxxxxxx>]

Looks really great, but I have concern for the viability of the fixed
electrodes. Normally they are bigger and well attached to heat sinking
blocks. Big wire diameter won't mean much if the power eats the fixed
electrodes.

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Jeremy Scott
Sent: Monday, July 28, 2008 6:14 PM
To: Tesla Coil Mailing List
Subject: RE: [TCML] Connecting the primary

I built it to handle lots and lots of power. 

Here's a picture of the spark gap:

https://mywebspace.wisc.edu/jeremyscott/web/ASRG.JPG

Note the 1/0 lugs. :)


<snip>

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla