Re: [TCML] Xray transformer

[resonance@xxxxxxxxxxxx]

If the controller is solid state, without a lot of filtering on the pri
side of the xmfr, it will not work properly in a Tesla circuit.  The small
spikes coming back into the pri will interfere with the solid state
controller.

Dr. Resonance




> I have an 3 phase Xray transformer, controller and cooling system. The
> controller allows me to vary the HV output from 20,000 volts to 60,000
> volts in 1,000 volt increments and the current from 10 ma to 200 ma in 1
> ma increments.
>  1) For a tesla coil is there any advantage in having this capability.
>  2) What effect will varing the current do for the output
>  3) Does anyone have plans for a coil that could handle this transformer.
>  4) What kind of spark length is possible
>  5) I live in Thousand Oaks, Ca. would anyone like to do get involved in a
> joint venture to build a large coil.
>  6) What would the estimated cost be for such a coil.
>
> My name is Brian You can contact me by email at EinsteinWizard@xxxxxxxxxxx
> Please put the word 'coil' in the subject line.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>


Dr. Resonance

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla