[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Xray transformer
answers are in text below...
Brian Dieson wrote:
I have an 3 phase Xray transformer, controller and cooling system. The controller allows me to vary the HV output from 20,000 volts to 60,000 volts in 1,000 volt increments and the current from 10 ma to 200 ma in 1 ma increments.
1) For a tesla coil is there any advantage in having this capability.
yes, you could vary the streamer length and shape
2) What effect will varing the current do for the output
it will play havoc on tuning the coil and beat up your caps plus you
wont be able to use much more than 30KV on the output side unless you do
some SERIOUS insulative work on the wiring and primary coil and to add,
you will need some very hearty caps to handle the voltage
3) Does anyone have plans for a coil that could handle this transformer.
I dont but there probably is someone out there who does...
4) What kind of spark length is possible
15+ feet
5) I live in Thousand Oaks, Ca. would anyone like to do get involved in a joint venture to build a large coil.
6) What would the estimated cost be for such a coil.
probably 4-7K$ to do it right
My name is Brian You can contact me by email at EinsteinWizard@xxxxxxxxxxx
Please put the word 'coil' in the subject line.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla