[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Toroid Problems



I would think that making a smaller topload would be much cheaper and
easier than messing with any other components.  You could fry a cap
with a lower voltage rating and you would add a bit of resistance
probably in the connection between two primary conductors.  Just my
0.02, drake

On 8/5/08, Nicholas J. Goble <ngoble@xxxxxxx> wrote:
> What would be the best way to tune my coil, without limiting my
> performance?  In other words, what would be worse: larger primary,
> smaller caps, or smaller toroid?
>
> Also, would tapping my caps be unsafe?  I was told that my MMC's
> voltage rating should be 2-3 times my NST's output.  If I tap my MMC,
> will that be unsafe?
>
> Nicholas Goble
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>

-- 
Sent from Gmail for mobile | mobile.google.com
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla