[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE: [TCML] Toroid Problems

To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: RE: [TCML] Toroid Problems
From: "Nicholas J. Goble" <ngoble@xxxxxxx>
Date: Tue, 5 Aug 2008 14:56:06 -0500 (CDT)
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

What would be the best way to tune my coil, without limiting my 
performance?  In other words, what would be worse: larger primary, 
smaller caps, or smaller toroid?

Also, would tapping my caps be unsafe?  I was told that my MMC's 
voltage rating should be 2-3 times my NST's output.  If I tap my MMC, 
will that be unsafe?

Nicholas Goble
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Toroid Problems
  - From: Drake Schutt
- Re: RE: [TCML] Toroid Problems
  - From: Quarkster
- RE: RE: [TCML] Toroid Problems
  - From: Lau, Gary

Prev by Date: Re: [TCML] Transformer
Next by Date: RE: [TCML] Transformer
Previous by thread: Re: RE: [TCML] Toroid Problems
Next by thread: Re: [TCML] Toroid Problems
Index(es):
- Date
- Thread