[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Large Plsma Tube

To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Large Plsma Tube
From: "David N. Van Doren" <DNVanDoren@xxxxxxxxxxx>
Date: Fri, 30 Nov 2007 12:42:43 -0500
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
References: <BAY103-W22355160B01BB402104752F4700@xxxxxxx> <004e01c832e4$05193710$640fa8c0@HAL9000>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Dr. R is that 14.4 kV 800 mA @ 60Hz? Other than to back bleed other gases,why do you pump down the tube first ( to outgas all thats going to outgas?)and how far?


This is starting to jell in my mind quit nicly thanks Everyone.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Large Plsma Tube
  - From: resonance

References:
- Re: [TCML] Large Plsma Tube
  - From: Scott Bogard
- Re: [TCML] Large Plsma Tube
  - From: resonance

Prev by Date: Re: [TCML] Teslathons??? (Australian)
Next by Date: Re: [TCML] mot questions
Previous by thread: Re: [TCML] Large Plsma Tube
Next by thread: Re: [TCML] Large Plsma Tube
Index(es):
- Date
- Thread