[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Commercial VTTC

Original poster: Brett Miller <brmtesla2@xxxxxxxxx>

I would love to see those pics.


--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: Frank <fxrays@xxxxxxxxxx>
> Hi all,
> I have a commercial VTTC that was rescued from the
> dumpster.
> It was made by Phillips and all that I can see that
> is wrong is the
> grid caps are shot.
> The primary and secondary was wound on clear acrylic
> tubing.
> The set is powered by 220 and uses an TB2.5/300 tube
> and the HV
> supply is straight AC.
> Apparently it was used to pre test fluorescent tubes
> when they were
> manufactured.
> After a long search I found exact replacements for
> the grid caps. I
> just need to clean up the potting material that
> leaked from the cap
> and make a control harness.
> The case could stand a repaint but not critical.
> I was lucky in that a schematic was found with the
> coil!
> If anyone is interested in seeing it, I can send a
> zip file of pix
> and the schematic. It is about 1.1 MB
> Thanks, Frank

Want to start your own business?
Learn how on Yahoo! Small Business.