[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

transformer oil, mineral oil, silicone sealant

To: tesla@xxxxxxxxxx
Subject: transformer oil, mineral oil, silicone sealant
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 21 Feb 2007 01:35:56 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <tcmlmod@xxxxxxxxxxxxx>
Resent-date: Wed, 21 Feb 2007 01:35:54 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <HJHYRZ7Q0kJ.A.BoD.qRA3FB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>

I made this diode array which is 7 X stacked 20kv 40ma FWBs in parallel. If
I make a square PVC chamber and seal the diodes into the chamber, can I get
away with filling it with slilicon or somethine else? Or do I need to use
transformer oil, or mineral oil? I would rather the end result not leak oil
or spew rancid mineral oil. I discected the diodes from a working 120kvdc
x-ray. Any advice would be greatly appreciated.

Sincerely,

Miles Waldron

Prev by Date: My new website such as it is
Next by Date: Re: calculations of capacitance
Previous by thread: My new website such as it is
Next by thread: Re: transformer oil, mineral oil, silicone sealant
Index(es):
- Date
- Thread