Re: [TCML] Oil insulated coils

["David Svensson" <david@xxxxxxxxx>]

Hi! i seem to remember seeing on Terry Blakes Homepage that he had made a 
oil filled secondary.
if i remember correct the secondary was incased in another acrylic tube 
filled with oil and sealed.
maybe terry is on the list and could give some moore info?
Best Wishes/David




> From: FutureT@xxxxxxx> Date: Sun, 9 Dec 2007 10:13:56 -0500> To: 
> tesla@xxxxxxxxxx> CC: > Subject: [TCML] Oil insulated coils> > > In a 
> message dated 12/8/2007 10:10:24 P.M. US Eastern Standard Time, > 
> bartb@xxxxxxxxxxxxxxxx writes:> > >Well, I guess someone could build a 
> little > >coil under these conditions at home, but> >not so easy for a 
> moderate to > >large coil.> > >Take care,> >Bart> > > Bart, all,> > Has 
> anyone on this list built a TC and put the coil partly> under oil or 
> another dielectric fluid to see how much coupling > could be tolerated? It 
> would be an interesting experiment.> > John> > > > > > > > > > 
> **************************************Check out AOL's list of 2007's 
> hottest > products.> 
> (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)> 
> _______________________________________________> Tesla mailing list> 
> Tesla@xxxxxxxxxxxxxx> http://www.pupman.com/mailman/listinfo/tesla
_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/connect.html?ocid=TXT_TAGLM_Wave2_newways_112007_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla