Re: coil AGW, diameter, H/W (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Fri, 24 Aug 2007 10:19:09 -0400
From: Scott Bogard <teslas-intern@xxxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: coil AGW, diameter, H/W (fwd)

Thanks Doc.
Scott Bogard.


>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: tesla@xxxxxxxxxx
>Subject: Re: coil AGW, diameter, H/W (fwd)
>Date: Fri, 24 Aug 2007 06:40:31 -0600 (MDT)
>
>
>---------- Forwarded message ----------
>Date: Thu, 23 Aug 2007 23:11:09 -0500
>From: resonance <resonance@xxxxxxxxxxxx>
>To: Tesla list <tesla@xxxxxxxxxx>
>Subject: Re: coil AGW, diameter, H/W (fwd)
>
>
>Use 4.5:1 H/D ratio.
>
>Use 1,200 turns on sec coil.
>
>With a fixed dia, multiply x 4.5 to get the correct winding length.
>
>Divide this length, in inches, by 1,200 turns --- this gives the correct
>wire OD.
>
>Look up the wire OD (use twin coated hi-temp wire) to determine the exact
>wire guage.
>
>For large coils, greater than 18 inch dia., go to 1,000 turns on the sec.
>Use same procedure but divide winding length by 1,000.
>
>
>Dr. Resonance
>
>
>Resonance Research Corp.
>www.resonanceresearch.com
>
>
>----- Original Message -----
>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: <tesla@xxxxxxxxxx>
>Sent: Thursday, August 23, 2007 5:39 PM
>Subject: coil AGW, diameter, H/W (fwd)
>
>
>
>---------- Forwarded message ----------
>Date: Thu, 23 Aug 2007 17:28:25 -0400
>From: Scott Bogard <teslas-intern@xxxxxxxxxxx>
>To: tesla@xxxxxxxxxx
>Subject: coil AGW, diameter, H/W
>
>Hey guys,
>      Does anybody out there have a good table of approximations, for
>recommended wire gauge, coil diameter, and H/W ratio (example 3-in 
>diameter,
>28AWG, 5/1 H/W), from small sizes to large (like 3-in to 18-in).  Just
>sometihg I want to tuck away for future reference, thanks.
>Scott Bogard.
>
>_________________________________________________________________
>See what you’re getting into…before you go there
>http://newlivehotmail.com/?ocid=TXT_TAGHM_migration_HM_viral_preview_0507
>
>
>
>
>
>
>

_________________________________________________________________
See what you’re getting into…before you go there 
http://newlivehotmail.com/?ocid=TXT_TAGHM_migration_HM_viral_preview_0507