Re: Lincoln Welders - Differences Between AC-225 Versions ?

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>

Cameron,

The only difference that I can see is a slight difference
in the outer casing and I think the only reason for that
is that one of them is an older model than the other. If
I had a choice, I'd probably rather have the older one
since it probably has copper windings instead of alumi-
num. Of course you're looking for two of them anyway,
aren't you? In any case, they are basically identical, elec-
trically. IIRC, these are only rated at a 20% duty cycle
at their max amperage setting, but for most of us coilers,
that's good enough ;^))

David Rieben

----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, November 16, 2006 9:20 AM
Subject: RE: Lincoln Welders - Differences Between AC-225 Versions ?


> Original poster: "Cameron B. Prince" <cplists@xxxxxxxxxxxxxxxxx>
>
> Hey guys,
>
> Can you tell me if there are significant differences between these models
of
> the AC-225? Notice how the front panel is different:
>
> http://i24.ebayimg.com/05/i/07/c3/0a/68_1.JPG
>
> http://i15.ebayimg.com/04/i/07/6c/10/fa_1_b.JPG
>
> Thanks,
> Cameron
>
>