Re: Clear Coat for Secondaries ? ? ?

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

Hi Dan,

Scott Hanson borrowed me a coil that has a beautiful clear coating on 
it!  I got some of the "EnviroTex Lite" for my next coil but have not 
tried it yet.  It should be available at any craft store and many 
hardware stores.:

http://www.eti-usa.com/consum/envtex/envlite.htm

http://www.eti-usa.com/wheretobuy/consum.html

It is a two part epoxy that is used for thick coating such as bar 
tables.  Slowly turn the coil while it cures.  It is not supposed to 
smell bad so you can do it inside where dust is low.

Cheers,

        Terry


At 08:36 AM 5/15/2006, you wrote:
> Can someone recommend a good clear coat for secondary coils that looks
> aestetically good.  This will be used for a secondary coil wound on
> clear acrylic tubing.  The standard polyurethane is no good since it
> dries yellow and flakes.  Perhaps a two-part epoxy?
>
> Any help appreciated!
>
> Thanks
> Dan
> http://www.easternvoltageresearch.com