[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: twin stacked primary supports



Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Hi Mike,

As Gary mentioned, you'll need to insulate the two primary's. Given your supports are already drilled and cut, maybe you could add a channel on each side of the supports between the two layers so that acrylic (or some insulator) plate could be cut to size and slid into place in the channels (and glued).

Take care,
Bart

Tesla list wrote:

Original poster: "Mike Tucknott" <michael.tucknott@xxxxxxxxxx>

Hi All

The first of the 30deg twin stacked primary supports is now finished only
another 3 to build.
Go take a look at <http://freespace.virgin.net/michael.tucknott/bm6_coil_pictures.htm>http://freespace.virgin.net/michael.tucknott/bm6_coil_pictures.htm
Any comments welcome


Cheers Mike Tucknott

Smokin in south Oxfordshire UK
<http://freespace.virgin.net/michael.tucknott/tesla.htm>http://freespace.virgin.net/michael.tucknott/tesla.htm