[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: toroid HV terminals for Tesla coils and Van de Graaff generators
Original poster: "Scott Hanson" <huil888@xxxxxxxxxxxx>
Can you provide some ballpark estimate of the cost of these toroids?
If you just let us know the "worst-case" pricing based on your own
order size, this would help put things into perspective. Beyond the
worst-case estimate, the per-toroid pricing would only get better as
additional list members added their orders.
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
Sent: Monday, July 03, 2006 9:50 AM
Subject: toroid HV terminals for Tesla coils and Van de Graaff generators
Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>
On Thursday I will be entering a "batch order" for 20 x 5 inch size
spun aluminum toroids. These may be used for either Tesla coil
toploads, Van de Graaff collector terminals (pulleys may be
"sandwiched" between two toroids, Cockkroft-Walton multipliers, or
Marx impulse generators.
By entering a batch order we get a 30-40% discount on the per toroid
cost --- dependent on the number of terminals ordered. Delivery is
typically 4-5 weeks ARO.
If interested, contact me off-list and I will add you to my order
count. By Thurs afternoon, depending on number of persons
interested, I will enter the order and have a final price. I will
need your full mailing address and zipcode to estimate shipping costs.