Re: rotary bps

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Paul Benham" <paulb@xxxxxxxxxxxxxxxxxxxx>

Hi Colin,

On my MOT voltage doubled power supply I have always had best results with a
lower breakrate than a higher breakrate.  I cannot say at what break rate it
was best as I have never actually measured the breakrate when the coil has
been running.

Cheers,

Paul.

----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, March 29, 2002 10:48 PM
Subject: rotary bps


> Original poster: "colin.heath4 by way of Terry Fritz <twftesla@xxxxxxxxx>"
<colin.heath4@xxxxxxxxxxxx>
>
> hi all,
>         iv run my sync rotary spark gap tonight with good results with a
max of
> 4'
> the gap is running at 400bps this is with a mot supply
> will power increase with 200bps as the caps have longer to charge?
> many thanks
> colin heath
>
<http://www.geocities.com/colinheath2002/>www.geocities.com/colinheath2002/
>
>
>