[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Wanted Maxwell .03 37667 (fwd)



Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Sat, 16 Dec 2006 16:36:31 -0500
From: Bill Wilson <wtw@xxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Wanted Maxwell .03 37667 (fwd)

can you use them with a potential transformer
----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Saturday, December 16, 2006 3:22 PM
Subject: Re: Wanted Maxwell .03 37667 (fwd)


> Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Sat, 16 Dec 2006 11:00:22 -0700
> From: resonance <resonance@xxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: Wanted Maxwell .03 37667 (fwd)
>
>
> In short Tesla coil duty service they work fine if used with nsts.  Do not
> use them with pole xmfrs and high rep rates --- they will fail, sometimes
> explosively!
>
> They are only designed for a few pulses per second and not the typical
> 450-500 pulses per sec of a pole xmfr operated non-synchro TC.
>
> Dr. Resonance
>
>
>> ---------- Forwarded message ----------
>> Date: Fri, 15 Dec 2006 23:50:17 +0000
>> From: nancylavoie@xxxxxxxxxxx
>> To: Tesla list <tesla@xxxxxxxxxx>
>> Subject: Re: Wanted Maxwell .03 37667 (fwd)
>>
>> Was it ever really determined that these caps are junk? Mine seems to 
>> work
>> pretty good with two 15/30 N.S.T.s.Getting about 30 inch sparks.Is this a
>> disaster waiting to happen?This cap was kind of expensive.   Wyatt
>>
>> -------------- Original message -------------- 
>> From: "Tesla list" <tesla@xxxxxxxxxx>
>>
>>> Original poster: Gerry Reynolds
>>>
>>>
>>>
>>> ---------- Forwarded message ---------- 
>>> Date: Fri, 15 Dec 2006 13:01:43 -0800
>>> From: Jim Mora
>>> To: 'Tesla list'
>>> Subject: Wanted Maxwell .03 37667
>>>
>>> Hello List,
>>>
>>> Wanted the dreaded 37667, for a NON Tesla coil circuit I am building.
>>> They
>>> must be not overvolted and in the ballpark for capacitance, 7 needed.
>>> These
>>> will be used more in the manner they were designed for.
>>> Upgrade to CD MMC and off load your .03 boat anchor!
>>>
>>> Thanks,
>>> Jim Mora
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
>