Re: Wanted Maxwell .03 37667 (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Sat, 16 Dec 2006 22:05:05 -0700
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Wanted Maxwell .03 37667 (fwd)



Yes, usually at less than 4-5 kVA max.

Dr. Resonance
----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Saturday, December 16, 2006 5:28 PM
Subject: Re: Wanted Maxwell .03 37667 (fwd)


> Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Sat, 16 Dec 2006 16:36:31 -0500
> From: Bill Wilson <wtw@xxxxxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: Wanted Maxwell .03 37667 (fwd)
>
> can you use them with a potential transformer
> ----- Original Message ----- 
> From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Saturday, December 16, 2006 3:22 PM
> Subject: Re: Wanted Maxwell .03 37667 (fwd)
>
>
>> Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>
>>
>>
>>
>> ---------- Forwarded message ----------
>> Date: Sat, 16 Dec 2006 11:00:22 -0700
>> From: resonance <resonance@xxxxxxxxxxxx>
>> To: Tesla list <tesla@xxxxxxxxxx>
>> Subject: Re: Wanted Maxwell .03 37667 (fwd)
>>
>>
>> In short Tesla coil duty service they work fine if used with nsts.  Do 
>> not
>> use them with pole xmfrs and high rep rates --- they will fail, sometimes
>> explosively!
>>
>> They are only designed for a few pulses per second and not the typical
>> 450-500 pulses per sec of a pole xmfr operated non-synchro TC.
>>
>> Dr. Resonance
>>
>>
>>> ---------- Forwarded message ----------
>>> Date: Fri, 15 Dec 2006 23:50:17 +0000
>>> From: nancylavoie@xxxxxxxxxxx
>>> To: Tesla list <tesla@xxxxxxxxxx>
>>> Subject: Re: Wanted Maxwell .03 37667 (fwd)
>>>
>>> Was it ever really determined that these caps are junk? Mine seems to
>>> work
>>> pretty good with two 15/30 N.S.T.s.Getting about 30 inch sparks.Is this 
>>> a
>>> disaster waiting to happen?This cap was kind of expensive.   Wyatt
>>>
>>> -------------- Original message -------------- 
>>> From: "Tesla list" <tesla@xxxxxxxxxx>
>>>
>>>> Original poster: Gerry Reynolds
>>>>
>>>>
>>>>
>>>> ---------- Forwarded message ---------- 
>>>> Date: Fri, 15 Dec 2006 13:01:43 -0800
>>>> From: Jim Mora
>>>> To: 'Tesla list'
>>>> Subject: Wanted Maxwell .03 37667
>>>>
>>>> Hello List,
>>>>
>>>> Wanted the dreaded 37667, for a NON Tesla coil circuit I am building.
>>>> They
>>>> must be not overvolted and in the ballpark for capacitance, 7 needed.
>>>> These
>>>> will be used more in the manner they were designed for.
>>>> Upgrade to CD MMC and off load your .03 boat anchor!
>>>>
>>>> Thanks,
>>>> Jim Mora
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>