[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Wanted Maxwell .03 37667 (fwd)



Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Fri, 15 Dec 2006 19:32:11 -0800
From: Jim Mora <jmora@xxxxxxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: Wanted Maxwell .03 37667 (fwd)

Hello, to be fair we have used a lot of bandwidth on this cap in this forum.
The rating is 500 PPS and a 50% VOLTAGE REVERSAL. Therfore, 2 should be in
series to stay in spec if you are at ~50% peak of 35KV. You are probably not
charging it that much.

Jim Mora

I want them for a BIG cap charger (doublers) since I already have two. 

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx] 
Sent: Friday, December 15, 2006 5:17 PM
To: tesla@xxxxxxxxxx
Subject: Re: Wanted Maxwell .03 37667 (fwd)

Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Fri, 15 Dec 2006 23:50:17 +0000
From: nancylavoie@xxxxxxxxxxx
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Wanted Maxwell .03 37667 (fwd)

Was it ever really determined that these caps are junk? Mine seems to work
pretty good with two 15/30 N.S.T.s.Getting about 30 inch sparks.Is this a
disaster waiting to happen?This cap was kind of expensive.   Wyatt

-------------- Original message -------------- 
From: "Tesla list" <tesla@xxxxxxxxxx> 

> Original poster: Gerry Reynolds 
> 
> 
> 
> ---------- Forwarded message ---------- 
> Date: Fri, 15 Dec 2006 13:01:43 -0800 
> From: Jim Mora 
> To: 'Tesla list' 
> Subject: Wanted Maxwell .03 37667 
> 
> Hello List, 
> 
> Wanted the dreaded 37667, for a NON Tesla coil circuit I am building. They

> must be not overvolted and in the ballpark for capacitance, 7 needed.
These 
> will be used more in the manner they were designed for. 
> Upgrade to CD MMC and off load your .03 boat anchor! 
> 
> Thanks, 
> Jim Mora 
> 
> 
> 
> 
>