[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New to list (fwd)



Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Mon, 11 Dec 2006 19:54:56 -0800
From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: New to list (fwd)

Chris,

Welcome to the TCML! When you get that coil ready for "First Light", 
keep us informed. And don't be hindered to ask questions or offer advice 
on tid bits you've run across. That's what this list is all about.

Take care,
Bart

Tesla list wrote:

>Original poster: List moderator <mod1@xxxxxxxxxx>
>
>
>
>---------- Forwarded message ----------
>Date: Tue, 12 Dec 2006 10:15:02 +0800
>From: westland <westland@xxxxxx>
>To: tesla@xxxxxxxxxx
>Subject: New to list
>
>I've just signed on to the list and wanted to forward a quick thanks to 
>all of the members who have contributed to the list.  I've spend hours 
>looking  back through old posts on this site  familiarizing myself with 
>the electronics or Tesla coils ... I'm about 70% of the way through 
>building a medium sized coil (my first ...SRSG, 15kv 30ma NST, Terry 
>Fritz' filter, 20 deg conical primary,  4"x22" secondary, 5x16" toroid  
>by John Freau). I used TeslaMap for parameters, and am still working on 
>the SRSG oriental sync motor and G-11 rotor with tungsten points (plus a 
>pair of Quick Gaps which I understand are easier to use, so maybe I'll 
>start with these ... I have the PVC and copper pipe sections cut, so 
>just a matter of assembly).   It should be nice when I  complete, but 
>I'm taking each  item a step at a time to make sure I stay safe (and 
>don't blow any NSTs or other parts). 
>
>The list has been a goldmine of data, and it's nice to trod where others 
>have already done the heavy lifting.
>
>Chris Westland, Hong Kong
>
>
>
>  
>