RE: New to list (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Mon, 11 Dec 2006 21:45:17 -0600
From: Alan Majernick <rainylake@xxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: New to list (fwd)

Hi Chris:

Nice post Dr Westland and hope you are well. The great thing about this site
is the willingness of the members to help the new folks starting out, even
with the same questions they have heard over and over before. Just curious,
did you miss Hong Kong after being back in LA? You can contact me off list.

Have a good Holiday Everyone and Thanks for the Great Effort Terry!

Alan

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx] 
Sent: Monday, December 11, 2006 9:29 PM
To: tesla@xxxxxxxxxx
Subject: New to list (fwd)

Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Tue, 12 Dec 2006 10:15:02 +0800
From: westland <westland@xxxxxx>
To: tesla@xxxxxxxxxx
Subject: New to list

I've just signed on to the list and wanted to forward a quick thanks to 
all of the members who have contributed to the list.  I've spend hours 
looking  back through old posts on this site  familiarizing myself with 
the electronics or Tesla coils ... I'm about 70% of the way through 
building a medium sized coil (my first ...SRSG, 15kv 30ma NST, Terry 
Fritz' filter, 20 deg conical primary,  4"x22" secondary, 5x16" toroid  
by John Freau). I used TeslaMap for parameters, and am still working on 
the SRSG oriental sync motor and G-11 rotor with tungsten points (plus a 
pair of Quick Gaps which I understand are easier to use, so maybe I'll 
start with these ... I have the PVC and copper pipe sections cut, so 
just a matter of assembly).   It should be nice when I  complete, but 
I'm taking each  item a step at a time to make sure I stay safe (and 
don't blow any NSTs or other parts). 

The list has been a goldmine of data, and it's nice to trod where others 
have already done the heavy lifting.

Chris Westland, Hong Kong



-- 
____________________________________________________

J. Christopher Westland, PhD CPA
Professor, ISMT, University of Science & Technology, HK Clearwater
Bay,Kowloon, Hong Kong
Tel: 852 2358 7643
Fax: 852 2358 2421
Mob: 852 9528 1745
URL: ihome.ust.hk/~westland
Mobile e-mail: chris.westland@xxxxxxxxxxxx