Re: Capacitor needed

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Jack" <Jack@xxxxxxxxxxxxxxx>

Thank you Gary,

Nice table top coil you have, thanks for the link.

I found 0.15s now on eBay, six of them will work . . . just trying to 
cut down the size a bit. Do you have a link to a seller for 0.1s?

Many thanks,

Jack


----- Original Message -----
From: <mailto:tesla@xxxxxxxxxx>Tesla list
To: <mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx
Sent: Tuesday, December 05, 2006 10:07 AM
Subject: RE: Capacitor needed

Original poster: "Lau, Gary" <<mailto:Gary.Lau@xxxxxx>Gary.Lau@xxxxxx>

.0265uF is fairly large, uncommon, and expensive if you're talking
strictly about mica caps.  Is there a reason you can't use more commonly
available polypropylene caps?  Four 0.1uF/2kV caps will give you a very
economical .025kV/8kV cap.  I use this with a 4kV/20mA NST with
excellent results.  See 
<http://www.laushaus.com/tesla/minicoil.htm>http://www.laushaus.com/tesla/minicoil.htm

Regards, Gary Lau
MA. USA

 > Original poster: "Jack" <<mailto:Jack@xxxxxxxxxxxxxxx>Jack@xxxxxxxxxxxxxxx>
 >
 > Hi all,
 >
 > I would like a .0265 mica rated at least 10KV for a small 3KV/30 NST
project.
 >
 > Does anyone have something that will work?
 >
 > Thank you,
 >
 > Jack
 > Hilo
 > Have a great day!
 >

Have a great day!