[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: questions on first tesla coil
- To: tesla@xxxxxxxxxx
- Subject: Re: questions on first tesla coil
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 09 Oct 2005 20:52:05 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Sun, 9 Oct 2005 20:52:11 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <T2Ta1C.A.-fB.ZddSDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Jon Danniken" <danniken@xxxxxxxxxxx>
Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
> > 2) Do i need a filter for my NST?
>
> They are sort of expensive, at least use a properly adjusted safety gap!!
I'm using a modified "Terry" filter for my NST. Basically it's the same
idea except without the MOVs, and with the safety gap between the NST and
the Filter. It's a lot cheaper without the MOVs in place, and is definitely
better than nothing at all.
Jon