[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Current Limiting and Impedence
- To: tesla@xxxxxxxxxx
- Subject: RE: Current Limiting and Impedence
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 12 May 2005 20:33:56 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 12 May 2005 20:34:15 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <TJDSBC.A.3kF.kIBhCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Godfrey Loudner" <ggreen@xxxxxxxx>
Hello Paul
The I leg of the EI core of a MOT is pressed on and the seam welded.
After sawing off an I leg, one can see that the surfaces were not ground
to achieve super intimate contact. So a MOT is a transformer with a
gapped core.
Godfrey Loudner
I use two MOT's in series as a HV transformer for the power supply
providing approx +-5kV once fed through a voltage doubler arrangement.
These have the shunts removed, but are not gapped, they are working as
transformers.
Paul.