[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
broken secondary
- To: tesla@xxxxxxxxxx
- Subject: broken secondary
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 02 May 2005 20:19:02 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 2 May 2005 20:20:36 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <C0Gzk.A.4HD.y_tdCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>
When winding the secondary, what do you do in the event that your secondary
breaks?
do you solder it then glyptol or varnish or enamel the solder point real
well and just keep going? What if you cover the solder point with clay? Or
do you stick the wires inside the PVC through holes then solder them inside?
Or musat I start over, because I don't got much time?
Please help. < 8^ (
Steven Steele
P.S. I have looked online and couldn't find anything