[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Secondary Prep
- To: tesla@xxxxxxxxxx
- Subject: Secondary Prep
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 11 Mar 2005 07:50:41 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Fri, 11 Mar 2005 07:52:26 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <DG5JJB.A.4UC.pCbMCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Daniel Koll" <dk_spl_audio@xxxxxxxxxxx>
I am currently preparing my secondary. I am using 3" (3.5 OD) Sch 80 gray
PVC. I have sanded it and have applied 2 coats of fast drying minwax
polyurethane. I will then add 3 coats more of Helmsman Spa Urethane. I am
not doing anything on the inside of the PVC though, this is ok right? The
bottom is sealed with a PVC flange using PVC cement and the top will be
sealed with either 1/2" plexi or 3/4" MDF. Thanks