[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Possible salt-water cap vessel.
- To: tesla@xxxxxxxxxx
- Subject: RE: Possible salt-water cap vessel.
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 12 Feb 2005 15:42:03 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sat, 12 Feb 2005 15:42:39 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <XaFGyB.A.4nG.eZoDCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Christopher 'CajunCoiler' Mayeux" <cajuncoiler@xxxxxxx>
I kinda figured that might be the case, but I had so many of them
laying around, it wouldn't hurt to ask... these bottles are almost
too nice to throw out. :D
> -----Original Message-----
> as dielectrics, cerramics have a very desirable K value and good
> voltage breakdown characteristics, but exhibit a very high loss in RF
> circuits. i would definately avoid. not only that, but you'll need
> quite a few of them to reach the desired capacitance.
> > I was just pondering the possibility of using the 6.37oz
> > Old Spice bottles for a saltwater cap with a ceramic
> > dielectric. Has anyone tried this one yet?