[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: small secondary question



Original poster: "Harold Weiss" <hweiss@xxxxxxxxxx>

Hi Miles,

Platinum?  Heck, I'd sell it for the platinum!

You might have a couple of jumped turns that also could be causing problems.

David E Weiss

Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>

Please see this link to a little secondary tried.

<http://www.gravitymagnet.com/images/IMG_0005.JPG>http://www.gravitymagnet.com/images/IMG_0005.JPG

There are some winding errors.

It is 1 and 1/4 inch in diameter and 9 and 1/2 inches of wound wire onto
pvc.

It has an unknown number of turns of what I was told was 30G platinum wire.

It measures exactly 15 ohms, and not open or short circuit.

When I spark this little guy up inside a primary and tank that are known
good (from another working coil)

I get nothing out the topwire. With toploads I still get nothing.

Any advice would be appreciated.