Re: small secondary question

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Hi Miles,

I'm not sure what the resistivity is for platinum wire (possibly an 
alloy), but if it's #30, it's about 800 turns with a frequency 
nearing 2MHz. Is your primary LC resonant at 2MHz? (probably not).

Take care,
Bart

Tesla list wrote:

> Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>
>
> Please see this link to a little secondary tried.
>
> <http://www.gravitymagnet.com/images/IMG_0005.JPG>http://www.gravitymagnet.com/images/IMG_0005.JPG 
>
>
> There are some winding errors.
>
> It is 1 and 1/4 inch in diameter and 9 and 1/2 inches of wound wire onto
> pvc.
>
> It has an unknown number of turns of what I was told was 30G platinum wire.
>
> It measures exactly 15 ohms, and not open or short circuit.
>
> When I spark this little guy up inside a primary and tank that are known
> good (from another working coil)
>
> I get nothing out the topwire. With toploads I still get nothing.
>
> Any advice would be appreciated.