Re: secondary wire diameter

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

Hi Dmitry,

What is it you dont think so???  Yes the 6x24 toroid has a breakout 
of 500KV.  The 80 inches was measured and witnessed.  I did have the 
toroid a little too high and had frequent arcs to the strike rail 
from the corona ring, but did have an occasional long arc to a ground 
target.  Anyway the toroid is too small for a 2KW power level and I 
will have an 8x32 toroid ready soon and I will be happy to share pictures.

Gerry R.

> Original poster: "Dmitry (father dest)" <dest@xxxxxxxxxxx>
>
> Hello Gerry.
>
> > Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
>
> > Im currently at 2m sparks (80 inches) using a 8x36 inch coil.  My
> > topload is a 6x24 inch toroid which I think is too small for my power
> > level (2KW with SRSG).  I get lot of strikes to the strike rail
>
> > Anyway, hope this gives you an idea.
>
> no, i don`t think so - your coil can`t produce much more than 500kv
> (breakdown voltage of 6x24), but my will produce about 900kv at the
> same power level (12x39 toroid).