[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: secondary wire diameter

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

Hi Adam and others.

OK, third time is a charm. Terry moved my pictures into my own directory and changed the names to eliminate the spaces. Thankyou Terry. The pictures are from my 15/60 nst powered 8x36 inch coil using a static gap last summer. I currently have a 15/120 nst farm, running at 2.1 KW wall power, using a SRSG on the same coil and seem to be overpowering the coil with the current 6x24 toroid. My 8x32 toroid is assembled and now I need to fill the corrigations and tape it. Maybe I ought to try it before this last step.

http://www.hot-streamer.com/temp/GerryReynolds

Hope this now works for everyone.

Gerry R.

Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

Not quite, at least in my email client. Most links
don't do very well with spaces. I always use "_" in
lieu of spaces.

Adam

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: "Gerry  Reynolds"
> <gerryreynolds@xxxxxxxxxxxxx>
>
> Hi Yurtle,
>
> I just figured that out myself.  Hard to read the
> directory when you
> forget the name of the file :-((
>
> Anyway: here are the corrected links:
>
> http://www.hot-streamer.com/temp/The COIL.jpg
> http://www.hot-streamer.com/temp/48 Inch
> Streamers.jpg
> http://www.hot-streamer.com/temp/59 Inch Power
> Arc.jpg
>
> (I hope these work)
>
> Gerry R.
>
>
>
>
> >Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>
> >
> >Pretty coil.
> >Replace the "_" with space or "%20".
> >
> >Adam
> >
> >--- Tesla list <tesla@xxxxxxxxxx> wrote:
> >
> > > Original poster: "Gerry  Reynolds"
> > > <gerryreynolds@xxxxxxxxxxxxx>
> > >
> > > Hi Dmitry,
> > >
> > > Im currently at 2m sparks (80 inches) using a
> 8x36
> > > inch coil.  My
> > > topload is a 6x24 inch toroid which I think is
> too
> > > small for my power
> > > level (2KW with SRSG).  I get lot of strikes to
> the
> > > strike rail (4
> > > inches above the primary) and if I raise the
> toroid
> > > some, I get
> > > corona and arcs from the corona ring to strike
> rail.
> > >  I will try to
> > > lower the strike rail an inch or two, and I'm
> > > currently making a 8x32
> > > toroid that I hope can be raised further and
> still
> > > have it shield the
> > > corona ring.  If I can get the breakout to start
> > > further away from
> > > the center axis of the coil, I hope strikes to
> the
> > > strike rail will
> > > be less frequent.  Anyway, hope this gives you
> an
> > > idea.  You can view
> > > the coil in its earier configuation (last year
> > > running at an
> > > estimated 500watts wall power using two 15/30
> NSTs
> > > with a static gap,
> > > computer simulations show a PF of about 0.5)
> The
> > > coil part and top
> > > load are the same as I have today.
> > >
> > > http://www.hot-streamer.com/temp/The_coil.jpg
> > >
>
>http://www.hot-streamer.com/temp/48_Inch_Streamers.jpg
> > >
>
>http://www.hot-streamer.com/temp/59_Inch_Power_Arc.jpg
> > >
> > >
> > > Gerry R.
> > >
> > >
> > > >Original poster: "Dmitry (father dest)"
> > > <dest@xxxxxxxxxxx>
> > > >
> > > >Hello Gerry.
> > > >
> > > > > Original poster: "Gerry  Reynolds"
> > > <gerryreynolds@xxxxxxxxxxxxx>
> > > > > Hi Dmitry,
> > > >
> > > > > Congradulations on building your first coil.
> > > >
> > > >it`s building "on the paper", one year still
> > > remains until _start_ of
> > > >real building - don`t forget about this ;-)
> > > >
> > > > > Choose the height appropriately for the
> spark
> > > length you are planning on
> > > >
> > > >and what height do you consider acceptable for
> 2m
> > > sparks?
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
>