[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: secondary wire diameter



Original poster: "Dmitry (father dest)" <dest@xxxxxxxxxxx>

Hello Gerry.

> Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

> Im currently at 2m sparks (80 inches) using a 8x36 inch coil.  My
> topload is a 6x24 inch toroid which I think is too small for my power
> level (2KW with SRSG).  I get lot of strikes to the strike rail

> Anyway, hope this gives you an idea.

no, i don`t think so - your coil can`t produce much more than 500kv
(breakdown voltage of 6x24), but my will produce about 900kv at the
same power level (12x39 toroid).