[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Bifilar coil
- To: tesla@xxxxxxxxxx
- Subject: Re: Bifilar coil
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 05 Aug 2005 14:17:42 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Fri, 5 Aug 2005 14:20:04 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <Bk5rkC.A.BCG.zn88CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Mddeming@xxxxxxx
Hi Sebastiaan,
Series connected bifilar coils are useful for low voltages only.
As Tesla pointed out in the patent referred to below, the delta-V
between adjacent turns of the A coil and B coil is Vin/2. As a TC
primary with, say 20 kV peak, this means 10kV per turn which could
easily lead to self destruction. A bifilar secondary could see 150
kV/mm or more between turns which is a gradient of 150MV/m = instant
toast of any insulation.
In the patent Tesla seems to be referring to single, self-resonant
coils, not transformers per se, and definitely not a high-power TC.
Some people have used parallel wound bifilar coils for TC
secondaries, but any significantly superior performance has yet to be
demonstrated.
Hope this helps,
Matt D.
In a message dated 8/5/05 1:55:44 P.M. Eastern Daylight Time,
tesla@xxxxxxxxxx writes:
Original poster: Illicium Verum <sebas@xxxxxxxxxxxxxxxx>
Hello,
I'm wondering if someone has ever experimented with a bifilar coil
and what his or her results were?
This coil uses two wires laid next to each other on a form but with
the end of the first one connected to the beginning of the second one.
Tesla patent 512340
<http://www.keelynet.com/tesla/00512340.htm>http://www.keelynet.com/tesla/00512340.htm
Best regards,
Sebastiaan