Re: coupling coefficient

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au> 

Thanks to all who responded to my question on coupling coefficient.

Claude.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, September 25, 2004 10:50 AM
Subject: Re: coupling coefficient


 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 >
 >
 > Best performance should occur with sec coil elevated approx 2.5 inches
above
 > the horizontal plane of the primary inductor.
 >
 > Dr. Resonance
 >
 >  >
 >  >
 >  > Secondary coil dia. is 6.25"
 >  >
 >  > Claude.
 >  > ----- Original Message -----
 >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 >  > To: <tesla-at-pupman-dot-com>
 >  > Sent: Wednesday, September 22, 2004 11:42 PM
 >  > Subject: Re: coupling coefficient
 >  >  > What is the dia. of your secondary coil?   This is critical to
setting
 >  >  > the best coeff. of coupling.
 >  >  >
 >  >  > Dr. Resonance
 >  >  >
 >
 >