[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

*To*: tesla-at-pupman-dot-com*Subject*: Re: High Voltage Output*From*: "Tesla list" <tesla-at-pupman-dot-com>*Date*: Thu, 03 Jun 2004 16:31:41 -0600*Resent-Date*: Thu, 3 Jun 2004 16:34:57 -0600*Resent-From*: tesla-at-pupman-dot-com*Resent-Message-ID*: <9JfvZB.A.47F.He6vAB-at-poodle>*Resent-Sender*: tesla-request-at-pupman-dot-com

Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz> On 2 Jun 2004, at 23:33, Tesla list wrote: > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> > > > Hi Antonio, > > Would this be the sqrt of the turns ratio?? No. It is the turns ratio as L is dependent on turns squared (e.g. Wheeler's inductance formula has N^2 in the numerator). Malcolm > Gerry R > > > > Original poster: "Antonio Carlos M. de Queiroz" <acmdq-at-uol-dot-com.br> > > > Curiously, as both tanks are tuned to the same frequency, and so > > L1*C1=L2*C2, the gain is also equal to sqrt(L2/L1). If both coils > > could be wound with the same geometry, this would be precisely the > > turns ratio between the coils. > > Antonio Carlos M. de Queiroz > > > > >

- Prev by Date:
**SSTC dead times** - Next by Date:
**WIMA FKP1-MMC** - Prev by thread:
**Re: High Voltage Output** - Next by thread:
**Re: High Voltage Output** - Index(es):