[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: NST and GFI protection



Original poster: Bigggcoil-at-aol-dot-com 

Steve

  I bought a new 12/60 last year for experiments.  I ran it stock with the 
GFI intact, it did not like driving a Tesla Coil. A quick spark & shut 
down.  After pulling the cover and noting the reset button right under the 
top cover, the GFI circuit was no where to be found on top.  Off to the 
outdoor grill for 1 hour of heat ( and the wife nowhere around) I found the 
GFI at the very bottom opposite the 120 volt input bushing side.  After 
removing the GFI and connecting the primary to 120 volts, all was 
well.  The GFI circuit was in a carboard box with little tar inside of 
it.  It was a lot of work, I would not do it again.

Coiling in Oklahoma
Kevin E.