[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Charging inductors for resonant charging

To: tesla-at-pupman-dot-com
Subject: Re: Charging inductors for resonant charging
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 01 Feb 2004 19:33:30 -0700
Resent-Date: Sun, 1 Feb 2004 19:49:22 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <GMzLPB.A.GoF.xqbHAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


Power hack saw would do it in less than a minute.  If you hauled your core
down to a large metal supply company they would probably do it for you no
charge.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913

 > without resorting to a custom wound inductor. Now, the challenge becomes
 > how to cleanly cut the core of one of these beasts.
 >
 > -- Bert --
 >

Prev by Date: Removing Pig Top
Next by Date: Re: High voltage standing waves with a magnetron?
Prev by thread: RE: Charging inductors for resonant charging
Next by thread: Re: Charging inductors for resonant charging
Index(es):
- Date
- Thread