RE: Charging inductors for resonant charging

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Godfrey Loudner" <ggreen-at-gwtc-dot-net> 

I have a couple of depotted DTs. The cores of each consist of two ovals,
tightly bound with metal straps. If the straps are removed, the cores
fall apart long precut cross sections. According to the person I got
the DTs from, the core sections are stable and do not unravel themselves.
So some DTs are already set up for air gapping. I have not attempted to
remove the straps. There must be a special tool that allows one to
loosen or retighten the straps.

Godfrey Loudner

 >Now, the challenge becomes
 >how to cleanly cut the core of one of these beasts.

 >Bert