[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Best secondary size



Original poster: "Herbaleta" <herbaleta-at-herbaleta.hr> 

So i should use 240 mm pipe and wind 1400 turns of 0.77 mm wire? The first
secondary turn should be 6.35 cm above the first primary turn ( for fla
spiral)? Sory but i want to get things ok :-). BTW the sucker gap is too
heavy so it would be a pain to move the coil around my RQ gap can be seen
here:
http://free-kc.htnet.hr/Kreso-Bukvic/Model%204.htm . Pictures are a bit
large though!

Cheers

Kreso